ZyXEL Dimension ES-315-F Manual do Utilizador

Copyright © 2007. All rights reservedES-315-FIntelligent Layer 2 Managed SwitchQuick Start GuideVersion 3.70 7/2007Edition 1DEFAULT LOGINIP Address ht

ES-315-F Quick Start Guide92 Replace the screws.2.2 Make LAN and Power Connections1LAN: Using an Ethernet cable, connect your computer to one of the L

10ES-315-F Quick Start Guide2POWER: take the following steps to connect the included power adaptor.• Choose a hole in the ES-315-F to use for the powe

ES-315-F Quick Start Guide11" Use only the power adaptor that came with the ES-315-F.2.3 Check the LEDsLook at the LEDs (lights) on the front of

12ES-315-F Quick Start GuideYou must set your computer to use a static IP address in the 192.168.1.2 - 192.168.1.254 range with a subnet mask of 255.2

ES-315-F Quick Start Guide13" Note down your computer’s current IP settings before you change them. You may need them later. 6 Select Use the fo

14ES-315-F Quick Start GuideClose the Network Connections window.3 Log In To the Web ConfiguratorTake the following steps to access the ES-315-F for i

ES-315-F Quick Start Guide15A window similar to the following appears.Enter the default username (admin) and the default password (1234). Click OK.V I

16ES-315-F Quick Start GuideThe Status screen displays. 4 Set the PasswordFor security reasons, you should change the password when you first log in.T

ES-315-F Quick Start Guide171 Click Management in the navigation panel on the left of the screen. In the menu that displays, click Access Control. The

18ES-315-F Quick Start Guide• Enter the default password (1234) in the Old Password field.• Choose a new password up to 31 characters in length (let-t

ES-315-F Quick Start Guide11 OverviewYour ES-315-F is an intelligent layer-2 Ethernet switch with four Fast Ethernet RJ-45 ports and one Fast Ethernet

ES-315-F Quick Start Guide19In the web configurator’s navigation panel, click Basic Settings, then select IP Setup. The following screen displays.

20ES-315-F Quick Start Guide" If you change the ES-315-F’s IP address, you will need to use the new one in order to access the web configurator o

ES-315-F Quick Start Guide21" If you do this, ensure that you can access the DHCP server’s list of devices to which it has given IP addresses. If

22ES-315-F Quick Start GuideV If you cannot access the ES-315-F, have problems accessing the Internet through the ES-315-F, or forget the password, yo

ES-315-F Quick Start Guide233 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws an

24ES-315-F Quick Start GuideThe following are dimensions of an M4 tap screw and masonry plug used for wall mounting. All measurements are in millimete

2ES-315-F Quick Start Guide2 Make Hardware Connections2.1 Connect the WANTo make the ES-315-F’s fiber-optic connection you need to:1 Open the ES-315-F

ES-315-F Quick Start Guide32 Lift the cover.2.1.2 Install A TransceiverThe ES-315-F supports MSA (Multi-Source Agreement) compliant SFP transceivers.

4ES-315-F Quick Start Guide• SFP transceivers are equipped with a Class 1 laser, which emits invisible radiation when the device or system is pow-ered

ES-315-F Quick Start Guide54 Insert the SFP transceiver into the slot until it snaps into place." Your SFP transceiver has a mechanism that preve

6ES-315-F Quick Start Guide2.1.3 Install Fiber-optic CableFollow these procedures to install the fiber-optic cable.Attach Wire MountsRemove the adhesi

ES-315-F Quick Start Guide73 Insert bushings into the remaining vacant holes to cover them.4 Coil excess fiber-optic cable around the inside of the ES

8ES-315-F Quick Start Guide2 Insert the end of the fiber-optic cable into the SFP transceiver. Close the ES-315-F1 Close the cover.