ZyXEL Comet 3356P-LAN Manual do Utilizador

Comet 3356P-LANUser’s ManualVersion 1.0ZyXELACCESSING THE INTERNET AND INTRANET

4 Installation 5. The installation program will install all necessary drivers and modify yourcomputers AUTOEXEC.BAT and NET.CFG directories.6. Sele

Installation 52. Insert the driver diskette into the floppy drive and set to the appropriate drive(A:\). Then type INSTALL and press Enter.3. Selec

6 InstallationPacket Driver Installation1. Insert the driver diskette into the floppy drive and set to the appropriate drive(A:\). Then type INSTALL

Installation 711. From the Network Drivers dialog box, press the Add Adapter... button to enterthe Add Network Adapter dialog box. Select Unlisted o

8 Installation8. Insert the driver disk into floppy disk drive, then enter the correct path (A:\).9. Select Ethernet + Fax/Modem PC then click OK.1

Installation 96. Choose My computer, Control Panel, Ports and remove all existing networkcomponents.7. Press CLOSE after all serial port devices ar

10 Installation3. Click the HAVE DISK button.4. Insert the Ethernet + Fax/Modem PC Card driver disk into floppy drive.5. Enter the correct path fo

Installation 114. If current settings are correct, select Start Installation and go to step 6.Otherwise, select Modify Parameters to make changes.5.

12 Installation

Basic Modem Operation 133 Basic Modem OperationThis chapter covers the basic commands and techniques involved in modem operation.In many cases, this

iiLimited WarrantyZyXEL warrants to the original end user (purchaser) that this product is free from any defectsin materials or workmanship for a peri

14 Basic Modem OperationThe next window sets the COM port settings. The settings used for the Comet shouldbe as follows:Bits per second: 115200Data b

Basic Modem Operation 15Pausing During Dialing: ATDT 9,,555 1212Dialing Without Waiting for Dial Tone: ATX0D, 555 1212Originating a call using an Ans

16 Basic Modem Operation• Multiple AT commands can be combined into one line. For example, AT&D2 andAT&K0 can be combined into one line AT&a

Basic Modem Operation 17Modem Result CodesWhen you execute or try to execute an AT command, your modem sends a result codeto let you know whether the

18 Basic Modem OperationThe ‘s’ is a number from 0 to 3 that represents the location in memory that the phonenumber is to be stored, and the ‘n’ is t

Basic Modem Operation 19ATCommandDescription%C1 Use both V.42bis and MNP 5 data compression

20 Basic Modem Operation

AT Command Set Summaries 214 AT Command Set SummariesBasic AT Command SetCommand Options Function & DescriptionA/ Re-execute the last command st

22 AT Command Set SummariesCommand Options Function & DescriptionM2 Speaker always onM3 Speaker off during dialing and on until carrier presentNn

AT Command Set Summaries 23Command Options Function & DescriptionZ0 Reset and recall user profile 0. Either Z0 orZ1 restores the same single prof

iiiChanges or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment. Sh

24 AT Command Set SummariesCommand Options Function & Description&W Store active configuration into the modem’s NVRAM&Zn=x Store telephon

AT Command Set Summaries 25Extended AT- Command SetCommand Options Function & Description-Cn Data calling tone options-C0 * Disable data calling

26 AT Command Set Summaries

Status Registers & Result Codes 275 Status Registers & Result CodesRegister Dec. Function & Description Default S0= 0 - 255 Set the numb

28 Status Registers & Result CodesRegister Dec. Function & Description Default0, 2 Hang up.1, 3 Fall back to an async connection.4, 6 Attempt

Status Registers & Result Codes 29Register Dec. Function & Description DefaultDon’t useS36=1 or 3, and S48=7LAPM or asyncS36=1 or 3, and S48=

30 Status Registers & Result CodesATV0 ATV1 X0 X1 X2 X3 X4 X759 CONNECT 31200 EC * # # # #60 CONNECT 33600 EC * # # # #70 CONNECT 32000 EC * # #

Status Registers & Result Codes 31ATV0 ATV1 W0 W1 W2 W2\V040 CONNECT 3009940 CONNECT 300 EC *9955 CONNECT 21600955 CONNECT 21600 EC *956 CONNECT

32 Status Registers & Result CodesNoEC No error control and data control protocols

iv Outside North America, you can dial +886-3-5783942 EXT 252 between 8:00AMand 5:00PM Taiwan time (GMT +8:00).• Fax: ZyXEL in North America: (714)

vTable of ContentsLimited Warranty iiFCC Part 15 Information iiFCC Requirements iiiContacting ZyXEL iii1 Introduction 1Unpacking Your Modem 1Hardware

viModem Result Codes 17Viewing S Register Values 17Changing S Register Values 17Non-Volatile Memory 17Storing Phone Numbers 17Dialing Stored Phone Num

Introduction 11 IntroductionCongratulations on the purchase of your Comet 3356P-LAN Type II PCMCIA card,one of ZyXEL's premier high-performance

2 Introduction

Installation 32 InstallationThis chapter describes how to install your Comet hardware. Installation proceduresalso cover Windows 3.x, Windows 95, Wi