ZyXEL Communications Modem n/a Manual do Utilizador descarregar pdf (Página 188)

Chapter 22 Wireless LAN Commands

DSL & IAD CLI Reference Guide

188

22.2 Command Examples

This section shows how to use the wireless LAN commands in some example scenarios.

22.2.1 WLAN Setup Example

The example varies depending on the commands you can use on your ZyXEL Device.

The following example:

• Activates the WLAN.

• Sets the wireless channel to 6.

• Sets the SSID to “ZyWiFi”.

• Sets the MAC address filter to deny association to devices on its list.

• Adds the MAC address “fa:fa:fa:fa:fa:fa” to the MAC address filter list slot 1.

• Activates the MAC filter.

• Sets the WEP type to 128-bit.

• Configures the WEP key 1 to be “1234567890123”.

• Sets the ZyXEL Device to use WEP key 1.

• Turns on QoS.

• Sets the QoS to AP mode.

• Configures the Voice QoS settings with an aifs of 9µs, a cwmin of 7 and a cwmax of

15, a txop-b of 250 and a txop-g of 250.

• Saves the configuration.

• Displays the configuration.

wlan wps release <Yes:1|No:0> Enables or disables removing of all configured

wireless and wireless security settings for WPS

connections.

wlan wmm active <Yes:1|No:0> Enables or disables the WMM feature on the ZyXEL

Device.

Table 69 General Wireless Commands (continued)

COMMAND DESCRIPTION

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 221 222

Sem comentários

ZyXEL Communications Modem n/a Manual do Utilizador Página 188