ZyXEL ACCESSING INTERNET & INTRANET omni series Manual do Utilizador Página 64

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 168
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 63
52 V.110 and Synchronous Mode Communications
will report RING to your terminal. External models will also make
an audible ring notification.
Making V.110 Calls
Before the ATDIxxx command is given to place the call, you need to
make sure that the TA is in asynchronous mode (AT&M0). Then use
the following commands to configure V.110:
AT Command Description
ATB10 User rate follows DTE speed (see note below).
ATB13 User rate = 2400bps.
ATB14 User rate = 4800bps.
ATB15 User rate = 9600bps.
ATB16 User rate = 14400bps.
ATB17 User rate = 19200bps.
ATB18 User rate = 38400bps.
ATB19 User rate = 57600bps (Japanese version only).
The highest Async V.110 user rate depends on bit 4 of S119 as
follows:
S119.4=0 19200 bps.
S119.4=1 38400 bps for areas other than Japan (default).
S119.4=1 57600 bps for Japanese version.
If the DTE speed is higher than what has been set, the user rate on
above table will be used.
Synchronous Connections (external)
Use the following commands to choose the data rate for synchronous
operation :
ATB11 64000bps
Vista de página 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 167 168

Comentários a estes Manuais

Sem comentários